• All PFA construction
• Compatible with both 820-01 and 820-02 PFA cyclonic spray chambers
• Use with any ICP-OES that uses an 18/9 ball joint connector on the torch
• This no baffle version is normally used with ICP-OES

Exit Port/Connector, 18-9 Socket, without Baffle

821-106

• All PFA construction
• Compatible with both 820-01 and 820-02 PFA cyclonic spray chambers
• Use with any ICP-OES that uses an 18/9 ball joint connector on the torch
• This no baffle version is normally used with ICP-OES

• All PFA construction
• Compatible with both 820-01 and 820-02 PFA cyclonic spray chambers
• Jogged connector tube raises chamber to clear sample intro area deck
• Two make-up gas ports (accept 1/8 inch OD gas line)
• Two cap nuts and two ferrule nuts provided, so connector can be used one or two make-up gases (or no make-up gas)
• Requires Savillex inert torch (851-011-100713) and injector assembly (851-011-100708 or 851-011-100709)
• Can also be used with ESI inert torch – connect directly to torch base
• Note: Please allow a 3-4 week lead-time for this product

Exit Port/Connector, Thermo Element2/Neptune ICP-MS, with Baffle

821-108

• All PFA construction
• Compatible with both 820-01 and 820-02 PFA cyclonic spray chambers
• Jogged connector tube raises chamber to clear sample intro area deck
• Two make-up gas ports (accept 1/8 inch OD gas line)
• Two cap nuts and two ferrule nuts provided, so connector can be used one or two make-up gases (or no make-up gas)
• Requires Savillex inert torch (851-011-100713) and injector assembly (851-011-100708 or 851-011-100709)
• Can also be used with ESI inert torch – connect directly to torch base
• Note: Please allow a 3-4 week lead-time for this product

• All PFA construction
• Compatible with both 820-01 and 820-02 PFA cyclonic spray chambers
• Connects to: Thermo iCAP ICP-OES 6000/7000 radial type only - does not fit Duo version
• Connects direct to standard Thermo torch base

Exit Port/Connector, Thermo iCAP ICP-OES Radial, without Baffle

821-111

• All PFA construction
• Compatible with both 820-01 and 820-02 PFA cyclonic spray chambers
• Connects to: Thermo iCAP ICP-OES 6000/7000 radial type only - does not fit Duo version
• Connects direct to standard Thermo torch base

• All PFA construction
• Compatible with both 820-01 and 820-02 PFA cyclonic spray chambers
• Connects to Spectro ICP-OES, radial type only, with ESI inert torch
• Requires ESI inert torch for Spectro ICP-OES. Connects directly to ESI inert torch base
• Choose 821-105 if Spectro demountable torch is used

Exit Port/Connector, Spectro Arcos Radial without Baffle

821-112

• All PFA construction
• Compatible with both 820-01 and 820-02 PFA cyclonic spray chambers
• Connects to Spectro ICP-OES, radial type only, with ESI inert torch
• Requires ESI inert torch for Spectro ICP-OES. Connects directly to ESI inert torch base
• Choose 821-105 if Spectro demountable torch is used

• All PFA construction
• Compatible with both 820-01 and 820-02 PFA cyclonic spray chambers (820-02 is recommended)
• Connects to: Thermo iCAP ICP-OES Duo type only (for radial version use 821-111)
• Connects direct to standard Thermo torch base

Exit port/connector for Thermo iCAP Duo ICP-OES, without baffle

821-114

• All PFA construction
• Compatible with both 820-01 and 820-02 PFA cyclonic spray chambers (820-02 is recommended)
• Connects to: Thermo iCAP ICP-OES Duo type only (for radial version use 821-111)
• Connects direct to standard Thermo torch base

• All PFA construction
• Compatible with both 820-01 and 820-02 PFA cyclonic spray chambers (820-02 is recommended)
• Connects to Spectro Arcos II ICP-OES (but only when the Glass Expansion (GE) D-Type torch is used)
• Connects direct to GE D-Type torch base

 

Exit Port/Connector for Spectro Arcos II with GE D-Type Torch with Baffle

821-115

• All PFA construction
• Compatible with both 820-01 and 820-02 PFA cyclonic spray chambers (820-02 is recommended)
• Connects to Spectro Arcos II ICP-OES (but only when the Glass Expansion (GE) D-Type torch is used)
• Connects direct to GE D-Type torch base

• Interchangeable uptake line (70 cm ) for X-Flow nebulizer
• Push fit, zero dead volume fitting
• X-flow is designed to be pumped but free aspirates at 400 uL/min with this uptake line

400 µl X-Flow Uptake Line Assembly

830-041

• Interchangeable uptake line (70 cm ) for X-Flow nebulizer
• Push fit, zero dead volume fitting
• X-flow is designed to be pumped but free aspirates at 400 uL/min with this uptake line

• Interchangeable uptake line (70 cm) for X-Flow nebulizer
• Push fit, zero dead volume fitting
• X-flow is designed to be pumped but fre aspirates at 1mL/min with this uptake line

1 ml X-Flow Uptake Line Assembly

830-042

• Interchangeable uptake line (70 cm) for X-Flow nebulizer
• Push fit, zero dead volume fitting
• X-flow is designed to be pumped but fre aspirates at 1mL/min with this uptake line

  $91.14
  Quantity

• Removable uptake line, 0.3 mm ID
• 80 cm length
• Savillex PFA zero dead volume connector
• For d-type (i.e. C-Flow 400d or 700d)) nebulizer bodies only

Replacement Uptake Line for C-Flow "d-type" Nebulizers

830-050

• Removable uptake line, 0.3 mm ID
• 80 cm length
• Savillex PFA zero dead volume connector
• For d-type (i.e. C-Flow 400d or 700d)) nebulizer bodies only

The C-Flow features a reliable and secure threaded connector that accepts 4 mm OD nylon or PTFE gas line. However, for easy connection to the various gas lines found in different ICP-OES and ICP-MS instruments, a gas connection kit is included with each C-Flow (except C-Flow for Aridus II). The connection kit includes:

• One meter of 4 mm OD PTFE gas line (connects to the threaded connector on the C-Flow body)
• A Festo 4 mm/6 mm push fit connector (connects the supplied 4mm OD PTFE gas line to the 6 mm OD nylon gas line used in some instruments)
• A barbed connector. The plain end of this connector connects to the threaded connector on the C-Flow body. The barbed end accepts Tygon gas line, which is commonly used on ICP-OES instruments.
• Note: the PE NexION 2000 serice icp-MS uses 1/8" gas line. To connect a C-Flow to a NexION 2000, please order part #830-052.

C-Flow Gas Line Connection Kit

830-051

The C-Flow features a reliable and secure threaded connector that accepts 4 mm OD nylon or PTFE gas line. However, for easy connection to the various gas lines found in different ICP-OES and ICP-MS instruments, a gas connection kit is included with each C-Flow (except C-Flow for Aridus II). The connection kit includes:

• One meter of 4 mm OD PTFE gas line (connects to the threaded connector on the C-Flow body)
• A Festo 4 mm/6 mm push fit connector (connects the supplied 4mm OD PTFE gas line to the 6 mm OD nylon gas line used in some instruments)
• A barbed connector. The plain end of this connector connects to the threaded connector on the C-Flow body. The barbed end accepts Tygon gas line, which is commonly used on ICP-OES instruments.
• Note: the PE NexION 2000 serice icp-MS uses 1/8" gas line. To connect a C-Flow to a NexION 2000, please order part #830-052.

The C-Flow features a reliable and secure threaded connector. Most ICP-OES and ICP-MS instruments use 4mm or 6mm OD gas line that the standard C-Flow Gas Line Connection Kit is designed for. However the PE NexION 2000 series ICP-MS uses a 1/8in fitting on the nebulizer gas supply. This kit connects the 1/8in gas supply directly to the C-Flow. The kit includes:

• One foot of 1/8in OD PFA gas line
• A 1/8in PVDF nut to connect to the NexION gas suppply
• A PFA nut to connect to the C-Flow body

C-Flow Gas Line Connection Kit - PE NexION 2000

830-052

The C-Flow features a reliable and secure threaded connector. Most ICP-OES and ICP-MS instruments use 4mm or 6mm OD gas line that the standard C-Flow Gas Line Connection Kit is designed for. However the PE NexION 2000 series ICP-MS uses a 1/8in fitting on the nebulizer gas supply. This kit connects the 1/8in gas supply directly to the C-Flow. The kit includes:

• One foot of 1/8in OD PFA gas line
• A 1/8in PVDF nut to connect to the NexION gas suppply
• A PFA nut to connect to the C-Flow body

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm PFA uptake line - no probe
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

Uptake Line for C50s Nebulizer

830-061

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm PFA uptake line - no probe
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 70 cm uptake line; comprised of ~60 cm of flexible uptake line and ~10 cm polyamide probe
• Encapsulated polyimide probe 2.8 mm OD, 102 mm long - compatible with Agilent I-AS autosampler only
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

Uptake Line for C50s Nebulizer with Autosampler Probe (70 cm)

830-062

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 70 cm uptake line; comprised of ~60 cm of flexible uptake line and ~10 cm polyamide probe
• Encapsulated polyimide probe 2.8 mm OD, 102 mm long - compatible with Agilent I-AS autosampler only
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm uptake line; comprised of ~85 cm of flexible uptake line and ~15 cm carbon probe
• Encapsulated carbon probe 2.9 mm OD, 14.4 cm long, including encapsulation
• Fits ESI SC Micro autosampler and CETAC ASX 110/112 with new style arm (from Feb 2015)
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

Uptake Line for C50s Nebulizer with Carbon Probe (100 cm)

830-064

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm uptake line; comprised of ~85 cm of flexible uptake line and ~15 cm carbon probe
• Encapsulated carbon probe 2.9 mm OD, 14.4 cm long, including encapsulation
• Fits ESI SC Micro autosampler and CETAC ASX 110/112 with new style arm (from Feb 2015)
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm uptake line; comprised of ~80 cm of flexible uptake line and ~20 cm carbon probe
• Encapsulated carbon probe 2.9 mm OD, 19.7 cm long, including encapsulation
• Fits ESI SC-2 and 2DX autosamplers (and larger format ESI autosamplers, but confirm uptake line is long enough)
• Uptake rate depends on s-type nebulizer body used. Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

Uptake Line for C50s Nebulizer with Carbon Probe for ESI SC2 Autosampler (100 cm)

830-068

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm uptake line; comprised of ~80 cm of flexible uptake line and ~20 cm carbon probe
• Encapsulated carbon probe 2.9 mm OD, 19.7 cm long, including encapsulation
• Fits ESI SC-2 and 2DX autosamplers (and larger format ESI autosamplers, but confirm uptake line is long enough)
• Uptake rate depends on s-type nebulizer body used. Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm PFA uptake line - no probe
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

Uptake Line for C100s Nebulizer

830-071

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm PFA uptake line - no probe
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 70 cm uptake line; comprised of ~60 cm of flexible uptake line and ~10 cm polyamide probe
• Encapsulated polyimide probe 2.8 mm OD, 102 mm long - compatible with Agilent I-AS autosampler only
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

Uptake Line for C100s Nebulizer with Autosampler Probe (70 cm)

830-072

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 70 cm uptake line; comprised of ~60 cm of flexible uptake line and ~10 cm polyamide probe
• Encapsulated polyimide probe 2.8 mm OD, 102 mm long - compatible with Agilent I-AS autosampler only
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm uptake line; comprised of ~85 cm of flexible uptake line and ~15 cm carbon probe
• Encapsulated carbon probe 2.9 mm OD, 14.4 cm long, including encapsulation
• Fits ESI SC Micro autosampler and CETAC ASX 110/112 with new style arm (from Feb 2015)
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

Uptake Line for C100s Nebulizer with Carbon Probe (100 cm)

830-074

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm uptake line; comprised of ~85 cm of flexible uptake line and ~15 cm carbon probe
• Encapsulated carbon probe 2.9 mm OD, 14.4 cm long, including encapsulation
• Fits ESI SC Micro autosampler and CETAC ASX 110/112 with new style arm (from Feb 2015)
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm uptake line; comprised of ~80 cm of flexible uptake line and ~20 cm carbon probe
• Encapsulated carbon probe 2.9 mm OD, 19.7 cm long, including encapsulation
• Fits ESI SC-2 and 2DX autosamplers (and larger format ESI autosamplers, but confirm uptake line is long enough)
• Uptake rate depends on s-type nebulizer body used. Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

Uptake Line for C100s Nebulizer with Carbon Probe for ESI SC2 Autosampler (100 cm)

830-078

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm uptake line; comprised of ~80 cm of flexible uptake line and ~20 cm carbon probe
• Encapsulated carbon probe 2.9 mm OD, 19.7 cm long, including encapsulation
• Fits ESI SC-2 and 2DX autosamplers (and larger format ESI autosamplers, but confirm uptake line is long enough)
• Uptake rate depends on s-type nebulizer body used. Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm PFA uptake line - no probe
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

Uptake Line for C250s Nebulizer

830-081

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm PFA uptake line - no probe
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 70 cm uptake line; comprised of ~60 cm of flexible uptake line and ~10 cm polyamide probe
• Encapsulated polyimide probe 2.8 mm OD, 102 mm long - compatible with Agilent I-AS autosampler only
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

Uptake Line for C250s Nebulizer with Autosampler Probe (70 cm)

830-082

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 70 cm uptake line; comprised of ~60 cm of flexible uptake line and ~10 cm polyamide probe
• Encapsulated polyimide probe 2.8 mm OD, 102 mm long - compatible with Agilent I-AS autosampler only
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm uptake line; comprised of ~85 cm of flexible uptake line and ~15 cm carbon probe
• Encapsulated carbon probe 2.9 mm OD, 14.4 cm long, including encapsulation
• Fits ESI SC Micro autosampler and CETAC ASX 110/112 with new style arm (from Feb 2015)
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

Uptake Line for C250s Nebulizer with Carbon Probe (100 cm)

830-084

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm uptake line; comprised of ~85 cm of flexible uptake line and ~15 cm carbon probe
• Encapsulated carbon probe 2.9 mm OD, 14.4 cm long, including encapsulation
• Fits ESI SC Micro autosampler and CETAC ASX 110/112 with new style arm (from Feb 2015)
• Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm uptake line; comprised of ~80 cm of flexible uptake line and ~20 cm carbon probe
• Encapsulated carbon probe 2.9 mm OD, 19.7 cm long, including encapsulation
• Fits ESI SC-2 and 2DX autosamplers (and larger format ESI autosamplers, but confirm uptake line is long enough)
• Uptake rate depends on s-type nebulizer body used. Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

Uptake Line for C250s Nebulizer with Carbon Probe for ESI SC2 Autosampler (100 cm)

830-088

• For s-type nebulizer bodies
• Unique zero dead volume connection
• 100 cm uptake line; comprised of ~80 cm of flexible uptake line and ~20 cm carbon probe
• Encapsulated carbon probe 2.9 mm OD, 19.7 cm long, including encapsulation
• Fits ESI SC-2 and 2DX autosamplers (and larger format ESI autosamplers, but confirm uptake line is long enough)
• Uptake rate depends on s-type nebulizer body used. Nebulizer uptake rate not guaranteed to be within original specification when uptake line is changed

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Kit includes spray chamber, end cap, connector, injector and holder, and quartz torch
• All PFA parts are precleaned in HNO₃/HF
• Comparable to Agilent part numbers: G3285A #102, G3285B #102, G3285-80015
• Compatible with Agilent 7500 Series

Inert kit with 2.5 mm Pt Injector, no O2 Gas Port (Compatible with Agilent 7500 Series)

850-011-100635

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Kit includes spray chamber, end cap, connector, injector and holder, and quartz torch
• All PFA parts are precleaned in HNO₃/HF
• Comparable to Agilent part numbers: G3285A #102, G3285B #102, G3285-80015
• Compatible with Agilent 7500 Series

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Kit includes spray chamber, end cap, connector, injector and holder, and quartz torch
• All PFA parts are precleaned in HNO₃/HF
• Comparable to Agilent part numbers: G4912-68002, G4912A #003
• Compatible with Agilent 7700/7800/7900/8x00 Series

Inert kit, 1.5mm ID Sapphire injector with O2/HMI gas port (Compatible with Agilent 7700/8X00 Series)

850-011-100698

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Kit includes spray chamber, end cap, connector, injector and holder, and quartz torch
• All PFA parts are precleaned in HNO₃/HF
• Comparable to Agilent part numbers: G4912-68002, G4912A #003
• Compatible with Agilent 7700/7800/7900/8x00 Series

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Kit includes spray chamber, end cap, connector, injector and holder, and quartz torch
• All PFA parts are precleaned in HNO₃/HF
• Comparable to Agilent part numbers: G4912-68000, G4912A #001
• Compatible with Agilent 7700/7800/7900/8x00 Series

Inert Kit, 2.5mm ID sapphire injector w/ O2/HMI gas port (Compatible with Agilent 7700/8x00 Series)

850-011-100699

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Kit includes spray chamber, end cap, connector, injector and holder, and quartz torch
• All PFA parts are precleaned in HNO₃/HF
• Comparable to Agilent part numbers: G4912-68000, G4912A #001
• Compatible with Agilent 7700/7800/7900/8x00 Series

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Kit includes spray chamber, end cap, connector, injector and holder, and quartz torch
• All PFA parts are precleaned in HNO₃/HF
• Comparable to Agilent part numbers: G4912-68003, G4912A #004
• Compatible with Agilent 7700/7800/7900/8x00 Series

Inert Kit, 1.5mm ID Platinum injector, with O2/HMI Gas Port (Compatible with 7700/8x00 Series)

850-011-100700

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Kit includes spray chamber, end cap, connector, injector and holder, and quartz torch
• All PFA parts are precleaned in HNO₃/HF
• Comparable to Agilent part numbers: G4912-68003, G4912A #004
• Compatible with Agilent 7700/7800/7900/8x00 Series

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Kit includes spray chamber, end cap, connector, injector and holder, and quartz torch
• All PFA parts are precleaned in HNO₃/HF
• Comparable to Agilent part numbers: G4912-68001, G4912A #002
• Compatible with Agilent 7700/7800/7900/8x00 Series

Inert Kit, 2.5 mm ID Pt Injector with O2/HMI Gas Port (Compatible with Agilent 7700/8x00 Series)

850-011-100701

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Kit includes spray chamber, end cap, connector, injector and holder, and quartz torch
• All PFA parts are precleaned in HNO₃/HF
• Comparable to Agilent part numbers: G4912-68001, G4912A #002
• Compatible with Agilent 7700/7800/7900/8x00 Series

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Integrated drain connection (barbed)
• Kit includes spray chamber, end cap, connector, injector and holder and quartz torch
• All PFA parts precleaned in HNO₃/HF

Thermo Inert Kit with 1.8 mm Pt Injector (Element 2/Neptune)

850-011-100706

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Integrated drain connection (barbed)
• Kit includes spray chamber, end cap, connector, injector and holder and quartz torch
• All PFA parts precleaned in HNO₃/HF

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Integrated drain connection (barbed)
• Kit includes spray chamber, end cap, connector, injector and holder and quartz torch
• All PFA parts precleaned in HNO₃/HF

Thermo Inert Kit with 1.8 mm Sapphire Injector (Element 2/Neptune)

850-011-100707

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design
• Integrated drain connection (barbed)
• Kit includes spray chamber, end cap, connector, injector and holder and quartz torch
• All PFA parts precleaned in HNO₃/HF

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design for improved stability with high matrix samples
• Kit includes spray chamber, end cap, drain connector (barbed), injector and holder and demountable quartz torch
• Also includes cap nut to seal the make up gas port if not used
• Designed to be used with the Savillex C-Flow PFA nebulizer but will accept any 6 mm OD nebulizer
  • Can also be used with a Savillex X-Flow nebulizer for very high TDS samples
• Fits NexION 300 Series only – does not fit ELAN or NexION 2000 Series
• All PFA parts precleaned in HNO3/HF

PerkinElmer Inert Kit with 2.0 mm Pt Injector (NexION 300 Series)

850-011-100786

• PFA construction. O-ring free end cap with make up gas port and 6 mm OD nebulizer port
• True double pass design for improved stability with high matrix samples
• Kit includes spray chamber, end cap, drain connector (barbed), injector and holder and demountable quartz torch
• Also includes cap nut to seal the make up gas port if not used
• Designed to be used with the Savillex C-Flow PFA nebulizer but will accept any 6 mm OD nebulizer
  • Can also be used with a Savillex X-Flow nebulizer for very high TDS samples
• Fits NexION 300 Series only – does not fit ELAN or NexION 2000 Series
• All PFA parts precleaned in HNO3/HF

• Precleaned in HNO₃/HF
• Comparable to Agilent part number G3285-80021
• Compatible with Agilent 7700/7800/7900/8x00 Series

Spray Chamber for Inert Kit (Compatible with Agilent 7700/7800/7900/8x00 Series)

851-011-100549

• Precleaned in HNO₃/HF
• Comparable to Agilent part number G3285-80021
• Compatible with Agilent 7700/7800/7900/8x00 Series

• Acepts 6 mm OD nebulizers. Side port for make up gas (4 mm OD gas line)
• Precleaned in HNO₃/HF
• Compatible with both Agilent 7500/7700/8800 Series and Thermo Electron Element 2 inert kits
• Comparable Agilent Part: G3285-80020

End Cap for PFA Inert Kit with Make Up Gas Port

851-011-100550

• Acepts 6 mm OD nebulizers. Side port for make up gas (4 mm OD gas line)
• Precleaned in HNO₃/HF
• Compatible with both Agilent 7500/7700/8800 Series and Thermo Electron Element 2 inert kits
• Comparable Agilent Part: G3285-80020

• Precleaned in HNO3
• Comparable to Agilent part number G3285-80022
• Compatible with Agilent 7500 Series

Drain Tube Fitting (Compatible with Agilent 7500 Series)

851-011-100551

• Precleaned in HNO3
• Comparable to Agilent part number G3285-80022
• Compatible with Agilent 7500 Series

• Compatible with all Agilent 7500 Series except 7500ce (G3272B) with HMI upgrade and 7500cx (G3272B)
• For these mainframes, use part number 851-011-100676 or 851-011-100622 instead
• Precleaned in HNO₃/HF
• Comparable to Agilent part number G3285-80023
• Compatible with Agilent 7500 Series

Connector Tube (No Gas Port) Short (Compatible with Agilent 7500 Series)

851-011-100552

• Compatible with all Agilent 7500 Series except 7500ce (G3272B) with HMI upgrade and 7500cx (G3272B)
• For these mainframes, use part number 851-011-100676 or 851-011-100622 instead
• Precleaned in HNO₃/HF
• Comparable to Agilent part number G3285-80023
• Compatible with Agilent 7500 Series

• Compatible 7500ce(G3272B) with HMI upgrade and 7500cs (G3272B) mainframes
• Precleaned in HNO₃/HF
• Comparable to Agilent part number G3285-80024
• Compatible with Agilent 7700/7800/7900/8x00 Series

Connector Tube (No Gas Port), Long (Compatible with Agilent 7700/7800/7900/8x00 Series)

851-011-100622

• Compatible 7500ce(G3272B) with HMI upgrade and 7500cs (G3272B) mainframes
• Precleaned in HNO₃/HF
• Comparable to Agilent part number G3285-80024
• Compatible with Agilent 7700/7800/7900/8x00 Series