Filtration
Single-use filtration for your process
-
25 mm Single Stage Filter Assembly, 1/8" x 1/8"
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- Hand tighten, no wrench required
- Ferrule nut connections for 1/8” tubing on inlet and outlet
$230.90
-
25 mm Single Stage Filter Assembly, 1/4" x 1/4"
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- Hand tighten, no wrench required
- Ferrule nut connections for ¼” tubing on inlet and outlet
$155.80
-
47 mm Single Stage Filter Assembly, 1/4" x 1/4", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
$186.86
-
47 mm Single Stage Filter Assembly, 1/4" x 1/4", Tefzel® Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- TefzelTM clamp nut for higher pessure applications
- TefzelTM service temperature range (300°C/148°C)
- Recommend wrench set for assembly
$185.82
-
50 mm Single Stage Filter Assembly, 1/4" x 1/4", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
- Suitable as particulate filter for EPA method 16A
$223.01
-
50 mm Single Stage Filter Assembly, 1/4" x 1/4", Tefzel® Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- TefzelÒ clamp nut for higher pressure applications
- TefzelÒ service temperature range (300/148)
- Recommend wrench set for assembly
$214.66
-
47 mm Single Stage Filter Assembly, 1/4" MNPT x 1/4" MNPT, PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- TefzelÒ clamp nut for higher pressure applications
- TefzelÒ service temperature range (300/148)
- Recommend wrench set for assembly
$186.99
-
50 mm Single Stage Filter Assembly, 1/2" x 1" x 1/2" x 1", PFA clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
$222.96
-
50 mm Single Stage Filter Assembly, 1/2" x 1" x 1/2" x 1", Tefzel®
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- Tefzel clamp nut for higher pressure applications
- Tefzel service temperature range (300/148)
- Recommend wrench set for assembly
$229.18
-
13 mm Single Stage Filter Assembly, Female Leur-Lock Inlet
- Service temperature range is 275°F/135°
- Two-piece design allows changing membranes without disconnecting lines
- Female luer lock inlet for syringe attachment
- Male luer slip outlet
- Compatible with Savillex PFA Syringe (P/N 700-510)
- Bi-directional membrane support accepts 13 mm filter membranes
$112.88
-
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Used for Dissolved and Particulate Carbon Analysis
- Features 1/4” inlet and outlet ports. Two 1/4in PFA ferrule nuts are included, to accept 1/4” OD tubing
- Wrench set for assembly is included
- Fluorocarbon Pressure Filtration Unit - DOC 47 Configuration
- 150 mL reservoir for sample
- Reference U.S.G.S National Field Manual for the Collection of Water-Quality Data
- Filters must be purchased separately
Filter Holder Assembly - U.S. Geological Survey - DOC 47 Configuration
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Used for Dissolved and Particulate Carbon Analysis
- Features 1/4” inlet and outlet ports. Two 1/4in PFA ferrule nuts are included, to accept 1/4” OD tubing
- Wrench set for assembly is included
- Fluorocarbon Pressure Filtration Unit - DOC 47 Configuration
- 150 mL reservoir for sample
- Reference U.S.G.S National Field Manual for the Collection of Water-Quality Data
- Filters must be purchased separately
$431.56
-
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- PFA body with stainless steel support grid
- Used for Dissolved Organic Carbon Analysis
- Fluorocarbon Pressure Filtration Unit - DOC 25 configuration
- Reference USGS National Field Manual Procedures for Processing Samples for Analysis of Dissolved Organic Carbon and Inorganic and Organic Particulate Carbon
- Filters must be purchased separately
Filter Holder Assembly - U.S.Geological Survey - DOC 25 Configuration
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- PFA body with stainless steel support grid
- Used for Dissolved Organic Carbon Analysis
- Fluorocarbon Pressure Filtration Unit - DOC 25 configuration
- Reference USGS National Field Manual Procedures for Processing Samples for Analysis of Dissolved Organic Carbon and Inorganic and Organic Particulate Carbon
- Filters must be purchased separately
$428.11
