Sample Prep
Sample prep solutions
-
120 mL Digestion Vessel, (2) 1/8" Side Ports, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Side ports for fluid or gas transfer
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$160.50
-
120 mL Digestion Vessel, (2) 1/4" Side Ports, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Side ports for fluid or gas transfer
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$164.55
-
750 mL Pressure Vessel
- Heavy walled PFA pressure vessel
- Use for demanding pressure applications
- Variety of closures are available
- Wrench set recommended for tightening
$663.39
-
1000 mL Pressure Vessel
- Heavy walled PFA pressure vessel
- Use for demanding pressure applications
- Variety of closures are available
- Wrench set recommended for tightening
$774.24
-
2000 mL Pressure Vessel
- Heavy walled PFA pressure vessel
- Use for demanding pressure applications
- Variety of closures are available
- Wrench set recommended for tightening
$1,380.70
-
25 mm Single Stage Filter Assembly, 1/8" x 1/8"
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- Hand tighten, no wrench required
- Ferrule nut connections for 1/8” tubing on inlet and outlet
$230.90
-
25 mm Single Stage Filter Assembly, 1/4" x 1/4"
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- Hand tighten, no wrench required
- Ferrule nut connections for ¼” tubing on inlet and outlet
$155.80
-
47 mm Single Stage Filter Assembly, 1/4" x 1/4", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
$186.86
-
47 mm Single Stage Filter Assembly, 1/4" x 1/4", Tefzel® Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- TefzelTM clamp nut for higher pessure applications
- TefzelTM service temperature range (300°C/148°C)
- Recommend wrench set for assembly
$185.82
-
50 mm Single Stage Filter Assembly, 1/4" x 1/4", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
- Suitable as particulate filter for EPA method 16A
$223.01
-
50 mm Single Stage Filter Assembly, 1/4" x 1/4", Tefzel® Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- TefzelÒ clamp nut for higher pressure applications
- TefzelÒ service temperature range (300/148)
- Recommend wrench set for assembly
$214.66
-
47 mm Single Stage Filter Assembly, 1/4" MNPT x 1/4" MNPT, PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- TefzelÒ clamp nut for higher pressure applications
- TefzelÒ service temperature range (300/148)
- Recommend wrench set for assembly
$186.99
