Sample Prep
Sample prep solutions
-
90 mm Filter Membrane, 1-2 Micron
- Sold in quantities of 10 membranes
- Made of PTFE
- Service temperature to 500°F (260°C)
- Chemically and biologically inert
$309.28
-
90 mm Filter Membrane, 5-6 Micron
- Sold in quantities of 10 membranes
- Made of PTFE
- Service temperature to 500°F (260°C)
- Chemically and biologically inert
$318.07
-
60 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$67.13
-
120 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$98.51
-
120 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT, 1/8" OD Tube Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 1/8" OD tube port molded into the side of the vessel
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$123.70
-
120 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT, 1/4" OD Tube Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 1/4" OD tube port molded into the side of the vessel
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$121.57
-
120 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT, 1/4" FNPT Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$122.46
-
375 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$284.63
-
375 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT, Grooved
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Grooved exterior to provide better heat transfer
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$266.16
-
DST-1000 Acid Purification System, 100 V
- All wetted parts are molded PFA
- No cooling water required
- Complete with heating source, separate control unit, GL45 1/4" transfer closure, and all necessary fittings
- CE certified and RoHS compliant
- Includes a bottle bracket and a Savillex 1000 mL PFA Bottle
- Depending on the usage rate of high purity acid in your lab, a DST-1000 can pay for itself in months or even weeks
- One year parts warranty
$8,891.06
-
DST-1000 Acid Purification System, 115 V
- All wetted parts are molded PFA
- No cooling water required
- Complete with heating source, separate control unit, GL45 1/4" transfer closure, and all necessary fittings
- CE certified and RoHS compliant
- Includes a bottle bracket and a Savillex 1000 mL PFA Bottle
- Depending on the usage rate of high purity acid in your lab, a DST-1000 can pay for itself in months or even weeks
- One year parts warranty
$8,788.48
-
DST-1000 Acid Purification System, 230 V
- All wetted parts are molded PFA
- No cooling water required
- Complete with heating source, separate control unit, GL45 1/4" transfer closure, and all necessary fittings
- CE certified and RoHS compliant
- Includes a bottle bracket and a Savillex 1000 mL PFA Bottle
- Depending on the usage rate of high purity acid in your lab, a DST-1000 can pay for itself in months or even weeks
- One year parts warranty
$8,788.48
-
DST-1000 Acid Purification System, 230 V, UK 3-Pin Fused Plug
- All wetted parts are molded PFA
- No cooling water required
- Complete with heating source, separate control unit, GL45 1/4" transfer closure, and all necessary fittings
- Configured with UK BS-1363 3-pin fused plug
- CE certified and RoHS compliant
- Includes a bottle bracket and a Savillex 1000 mL PFA Bottle
- Depending on the usage rate of high purity acid in your lab, a DST-1000 can pay for itself in months or even weeks
- One year parts warranty
$8,788.48
-
DST-4000 Acid Purification System, 120 V
- All wetted parts are molded PFA
- No cooling water required
- Graduated front fill tube shows acid level remaining
- Separate, digital temperature controller with auto shut-off feature
- Includes (2) 2000 mL Lab Bottles (150-01-2000)
- CE certified and RoHS compliant
- One year parts warranty
$14,164.67
-
DST-4000 Acid Purification System, 230 V
- All wetted parts are molded PFA
- No cooling water required
- Graduated front fill tube shows acid level remaining
- Separate, digital temperature controller with auto shut-off feature
- Includes (2) 2000 mL Lab Bottles (150-01-2000)
- CE certified and RoHS compliant
- One year parts warranty
$14,164.67
-
DST-4000 Acid Purification System, 230UK
- All wetted parts are molded PFA
- No cooling water required
- Graduated front fill tube shows acid level remaining
- Separate, digital temperature controller with auto shut-off feature
- Includes (2) 2000 mL Lab Bottles (150-01-2000)
- CE certified and RoHS compliant
- One year parts warranty
$14,164.67
-
150 mL Column Component Segment, 1-1/2" MNPT
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Threads: 1-1/2" male NPT both ends
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$95.62
-
150 mL Column Component Segment, 1-1/2" MNPT, 1/8" OD Tube Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 1/8" OD tube port molded into the side of the vessel
- Threads: 1-1/2" male NPT both ends
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$110.44
-
150 mL Column Component Segment, 1-1/2" MNPT, 1/4" OD Tube Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 1/4" OD tube port molded into the side of the vessel
- Threads: 1-1/2" male NPT both ends
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Single 1/4" side port
- Wrench set recommended for tightening
$106.41
-
150 mL Column Component Segment, 1-1/2" MNPT, 1/4" FNPT Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Threads: 1-1/2" male NPT both ends
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Single 1/4" FNPT side port
- Wrench set recommended for tightening
$171.80
-
150 mL Column Component Segment, 1-1/2" MNPT, 3/8" FNPT Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Threads: 1-1/2" male NPT both ends
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Single 3/8" FNPT side port
- Wrench set recommended for tightening
$167.89
-
150 mL Column Component Segment, 1-1/2" MNPT, 3/8" OD Tube Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 3/8" OD tube port molded into the side of the vessel
- Threads: 1-1/2" male NPT both ends
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$123.64
-
150 mL Column Component Segment, 1-1/2" MNPT and Filter Holder Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Threads: 1-1/2" male NPT at one end, male filter holder thread at other end (to accept filter holder clamp)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Filter holder thread can be attached directly to 47 or 50mm filter clamps
- Wrench set recommended for tightening
$127.42
-
150 mL Column Component Segment, 1-1/2" MNPT, 1/8" OD Tube Side Port and Filter Holder Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 1/8" OD tube port molded into the side of the vessel
- Threads: 1-1/2" male NPT at one end, male filter holder thread at other end (to accept filter holder clamp)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Filter holder thread can be attached directly to 47 or 50mm filter clamps
- Wrench set recommended for tightening
$140.44
-
150 mL Column Component Segment, 1-1/2" MNPT, 1/4" OD Tube Side Port and Filter Holder Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 1/4" OD tube port molded into the side of the vessel
- Threads: 1-1/2" male NPT at one end, male filter holder thread at other end (to accept filter holder clamp)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Filter holder thread can be attached directly to 47 or 50mm filter clamps
- Wrench set recommended for tightening
$126.47
-
150 mL Column Component Segment, 1-1/2" MNPT, 3/8" OD Tube Side Port and Filter Holder Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 3/8" OD tube port molded into the side of the vessel
- Threads: 1-1/2" male NPT at one end, male filter holder thread at other end (to accept filter holder clamp)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Filter holder thread can be attached directly to 47 or 50mm filter clamps
- Wrench set recommended for tightening
$148.49
-
375 mL Column Component Segment, 1-1/2" MNPT
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$355.94
-
Vial Cleaning System
- For cleaning PFA vials and labware by heated soaking
- Maximum surface temperature of hotplate for vial cleaning system is 450°F (230°C)
- System components: cleaning container, cleaning container lid, sealing ring, vent nut assembly, pour spout assembly, ½” cap nut and silicone grip mat
- Included silicone grip mat holds container in place when sealing ring is tightened or removed
$1,268.03
-
7 mL Vial Rack System
- Holds (72) 7 mL vials and closures
- PFA racks with PTFE post and handle
- Drip tray included
- Designed for use with the Savillex vial cleaning system
- May be used with some 4 L glass beakers (requires PFA beaker lid)
$1,062.80
-
HPX-100 Hotplate, 100 VAC
- Teflon™ PFA coated graphite: heated working surface area is 292 mm x 212 mm (11.5 in x 8.4 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 200°C (+/- 2°C at 150°C)
- 100 VAC
- Plug style NEMA 5-15P
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,540.05
-
HPX-100 Hotplate, 120 VAC
- Teflon™ PFA coated graphite: heated working surface area is 292 mm x 212 mm (11.5 in x 8.4 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 240°C (+/- 2°C at 150°C)
- 120 VAC
- Plug style NEMA 5-15P
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,540.05
-
HPX-100 Hotplate, 230 VAC
- Teflon™ PFA coated graphite: heated working surface area is 292 mm x 212 mm (11.5 in x 8.4 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 240°C (+/- 2°C at 150°C)
- 230 VAC
- Plug style CEE 7/7
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,518.98
-
HPX-100 Hotplate, 230 VAC, UK 3-Pin Fused Plug
- Teflon™ PFA coated graphite: heated working surface area is 292 mm x 212 mm (11.5 in x 8.4 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 240°C (+/- 2°C at 150°C)
- 230 VAC
- Plug style UK BS 1363A (3-pin fused plug)
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,525.61
-
15 mL Vial Rack System
- Holds (36) 15 mL vials and closures
- PFA racks with PTFE post and handle
- Drip tray included
- Designed for use with the Savillex vial cleaning system
- May be used with some 4 L glass beakers (requires PFA beaker lid)
$973.50
-
HPX-200 Hotplate, 120 VAC
- Teflon™ PFA coated graphite: heated working surface area is 415 mm x 292 mm (16.4 in x 11.5 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 200°C (+/- 2°C at 150°C)
- 120 VAC
- Plug style NEMA 5-15P
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,848.43
-
HPX-200 Hotplate, 230 VAC
- Teflon™ PFA coated graphite: heated working surface area is 415 mm x 292 mm (16.4 in x 11.5 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 240°C (+/- 2°C at 150°C)
- 230 VAC
- Plug style CEE 7/7
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,848.43
