Sample Prep
Sample prep solutions
-
50 mL Standard Tube, Conical Interior, Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- PFA non‑breakable
- Threaded top for long term storage
- Fits most standard centrifuge rotors
- RCF up to 5,000 g
$82.28
-
50 mL PFA Block Digestion Tube with Closure
- Designed for block digestion units
- Thin walled for maximum heat transfer and good visibility of contents
- 50 mL graduation mark to Class A specifications
- Includes a threaded polypropylene closure
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
$78.13
-
60 mL Standard Tube, Rounded Interior, Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- PFA non‑breakable
- Threaded top for long term storage
$101.93
-
75 mL Block Digestion Tube, Flat Interior, Open Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Designed for block digestion units
- Compatible with all acids
$99.75
-
2 mL Microcolumn, 1.5 mm ID x 3.2 mm OD x 15 cm Capillary
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Designed for ion exchange chromatography
- Frits are not included and must be purchased separately
$189.18
-
2 mL Microcolumn, 2.4 mm ID x 4.0 mm OD x 15 cm Capillary
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Designed for ion exchange chromatography
- Frits are not included and must be purchased separately
$189.03
-
5 mL Microcolumn, 3.2 mm ID x 4.7 mm OD x 20 cm Capillary
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Designed for ion exchange chromatography
- Frits are not included and must be purchased separately
$196.49
-
6 mL Microcolumn, 2.4 mm ID x 4.0 mm OD x 15 cm Capillary
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Designed for ion exchange chromatography
- Frits are not included and must be purchased separately
$215.92
-
15 mL Microcolumn, 4.0 mm ID x 6.3 mm OD x 20 cm Capillary
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Designed for ion exchange chromatography
- Frits are not included and must be purchased separately
$200.97
-
30 mL Microcolumn, 6.4 mm ID x 9.6 mm OD x 25 cm Capillary
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Designed for ion exchange chromatography
- Frits are not included and must be purchased separately
$225.73
-
60 mL Digestion Vessel, Flat Interior, Flat Exterior, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Flat exterior for hot plate heating and digestion
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$65.71
-
60 mL Digestion Vessel, Conical Interior, Cored Exterior, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Conical interior to aide in sample removal
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$66.96
-
120 mL Digestion Vessel, Flat Interior, Flat Exterior, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Flat exterior for hot plate heating and digestion
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$92.49
-
120 mL Digestion Vessel, Conical Interior, Cored Exterior, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Conical interior to aide in sample removal
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$96.15
-
120 mL Digestion Vessel, (1) 1/4" FNPT Side Port, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Side ports for fluid or gas transfer
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$157.54
-
120 mL Digestion Vessel, (2) 1/8" Side Ports, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Side ports for fluid or gas transfer
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$160.50
-
120 mL Digestion Vessel, (2) 1/4" Side Ports, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Side ports for fluid or gas transfer
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$164.55
-
750 mL Pressure Vessel
- Heavy walled PFA pressure vessel
- Use for demanding pressure applications
- Variety of closures are available
- Wrench set recommended for tightening
$663.39
-
1000 mL Pressure Vessel
- Heavy walled PFA pressure vessel
- Use for demanding pressure applications
- Variety of closures are available
- Wrench set recommended for tightening
$774.24
-
2000 mL Pressure Vessel
- Heavy walled PFA pressure vessel
- Use for demanding pressure applications
- Variety of closures are available
- Wrench set recommended for tightening
$1,380.70
-
25 mm Single Stage Filter Assembly, 1/8" x 1/8"
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- Hand tighten, no wrench required
- Ferrule nut connections for 1/8” tubing on inlet and outlet
$230.90
-
25 mm Single Stage Filter Assembly, 1/4" x 1/4"
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- Hand tighten, no wrench required
- Ferrule nut connections for ¼” tubing on inlet and outlet
$155.80
-
47 mm Single Stage Filter Assembly, 1/4" x 1/4", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
$186.86
-
47 mm Single Stage Filter Assembly, 1/4" x 1/4", Tefzel® Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- TefzelTM clamp nut for higher pessure applications
- TefzelTM service temperature range (300°C/148°C)
- Recommend wrench set for assembly
$185.82
-
50 mm Single Stage Filter Assembly, 1/4" x 1/4", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
- Suitable as particulate filter for EPA method 16A
$223.01
-
50 mm Single Stage Filter Assembly, 1/4" x 1/4", Tefzel® Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- TefzelÒ clamp nut for higher pressure applications
- TefzelÒ service temperature range (300/148)
- Recommend wrench set for assembly
$214.66
-
47 mm Single Stage Filter Assembly, 1/4" MNPT x 1/4" MNPT, PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- TefzelÒ clamp nut for higher pressure applications
- TefzelÒ service temperature range (300/148)
- Recommend wrench set for assembly
$186.99
-
50 mm Single Stage Filter Assembly, 1/2" x 1" x 1/2" x 1", PFA clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
$222.96
-
50 mm Single Stage Filter Assembly, 1/2" x 1" x 1/2" x 1", Tefzel®
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- Tefzel clamp nut for higher pressure applications
- Tefzel service temperature range (300/148)
- Recommend wrench set for assembly
$229.18
-
13 mm Single Stage Filter Assembly, Female Leur-Lock Inlet
- Service temperature range is 275°F/135°
- Two-piece design allows changing membranes without disconnecting lines
- Female luer lock inlet for syringe attachment
- Male luer slip outlet
- Compatible with Savillex PFA Syringe (P/N 700-510)
- Bi-directional membrane support accepts 13 mm filter membranes
$112.88
-
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Used for Dissolved and Particulate Carbon Analysis
- Features 1/4” inlet and outlet ports. Two 1/4in PFA ferrule nuts are included, to accept 1/4” OD tubing
- Wrench set for assembly is included
- Fluorocarbon Pressure Filtration Unit - DOC 47 Configuration
- 150 mL reservoir for sample
- Reference U.S.G.S National Field Manual for the Collection of Water-Quality Data
- Filters must be purchased separately
Filter Holder Assembly - U.S. Geological Survey - DOC 47 Configuration
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Used for Dissolved and Particulate Carbon Analysis
- Features 1/4” inlet and outlet ports. Two 1/4in PFA ferrule nuts are included, to accept 1/4” OD tubing
- Wrench set for assembly is included
- Fluorocarbon Pressure Filtration Unit - DOC 47 Configuration
- 150 mL reservoir for sample
- Reference U.S.G.S National Field Manual for the Collection of Water-Quality Data
- Filters must be purchased separately
$431.56
-
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- PFA body with stainless steel support grid
- Used for Dissolved Organic Carbon Analysis
- Fluorocarbon Pressure Filtration Unit - DOC 25 configuration
- Reference USGS National Field Manual Procedures for Processing Samples for Analysis of Dissolved Organic Carbon and Inorganic and Organic Particulate Carbon
- Filters must be purchased separately
Filter Holder Assembly - U.S.Geological Survey - DOC 25 Configuration
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- PFA body with stainless steel support grid
- Used for Dissolved Organic Carbon Analysis
- Fluorocarbon Pressure Filtration Unit - DOC 25 configuration
- Reference USGS National Field Manual Procedures for Processing Samples for Analysis of Dissolved Organic Carbon and Inorganic and Organic Particulate Carbon
- Filters must be purchased separately
$428.11
-
47 mm Two-Stage Filter Assembly, 1-1/2" x 1/4", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
$256.83
-
47 mm Two-Stage Filter Assembly, 1-1/2' x 3/8", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
$266.23
-
47 mm Two-Stage Filter Assembly, 1-1/2" x 1/4" MNPT, PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
$263.52
-
47 mm Two-Stage Filter Assembly, 1/4" x 1/4", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
$238.86
