- Total: 29
-
60 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$67.13
-
120 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$98.51
-
120 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT, 1/8" OD Tube Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 1/8" OD tube port molded into the side of the vessel
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$123.70
-
120 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT, 1/4" OD Tube Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 1/4" OD tube port molded into the side of the vessel
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$121.57
-
120 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT, 1/4" FNPT Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$122.46
-
375 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$284.63
-
375 mL Column Component Vessel, Flat Interior, 1-1/2" MNPT, Grooved
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Grooved exterior to provide better heat transfer
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$266.16
-
150 mL Column Component Segment, 1-1/2" MNPT
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Threads: 1-1/2" male NPT both ends
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$95.62
-
150 mL Column Component Segment, 1-1/2" MNPT, 1/8" OD Tube Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 1/8" OD tube port molded into the side of the vessel
- Threads: 1-1/2" male NPT both ends
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$110.44
-
150 mL Column Component Segment, 1-1/2" MNPT, 1/4" OD Tube Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 1/4" OD tube port molded into the side of the vessel
- Threads: 1-1/2" male NPT both ends
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Single 1/4" side port
- Wrench set recommended for tightening
$106.41
-
150 mL Column Component Segment, 1-1/2" MNPT, 1/4" FNPT Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Threads: 1-1/2" male NPT both ends
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Single 1/4" FNPT side port
- Wrench set recommended for tightening
$171.80
-
150 mL Column Component Segment, 1-1/2" MNPT, 3/8" FNPT Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Threads: 1-1/2" male NPT both ends
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Single 3/8" FNPT side port
- Wrench set recommended for tightening
$167.89
-
150 mL Column Component Segment, 1-1/2" MNPT, 3/8" OD Tube Side Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 3/8" OD tube port molded into the side of the vessel
- Threads: 1-1/2" male NPT both ends
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$123.64
-
150 mL Column Component Segment, 1-1/2" MNPT and Filter Holder Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Threads: 1-1/2" male NPT at one end, male filter holder thread at other end (to accept filter holder clamp)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Filter holder thread can be attached directly to 47 or 50mm filter clamps
- Wrench set recommended for tightening
$127.42
-
150 mL Column Component Segment, 1-1/2" MNPT, 1/8" OD Tube Side Port and Filter Holder Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 1/8" OD tube port molded into the side of the vessel
- Threads: 1-1/2" male NPT at one end, male filter holder thread at other end (to accept filter holder clamp)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Filter holder thread can be attached directly to 47 or 50mm filter clamps
- Wrench set recommended for tightening
$140.44
-
150 mL Column Component Segment, 1-1/2" MNPT, 1/4" OD Tube Side Port and Filter Holder Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 1/4" OD tube port molded into the side of the vessel
- Threads: 1-1/2" male NPT at one end, male filter holder thread at other end (to accept filter holder clamp)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Filter holder thread can be attached directly to 47 or 50mm filter clamps
- Wrench set recommended for tightening
$126.47
-
150 mL Column Component Segment, 1-1/2" MNPT, 3/8" OD Tube Side Port and Filter Holder Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single 3/8" OD tube port molded into the side of the vessel
- Threads: 1-1/2" male NPT at one end, male filter holder thread at other end (to accept filter holder clamp)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Filter holder thread can be attached directly to 47 or 50mm filter clamps
- Wrench set recommended for tightening
$148.49
-
375 mL Column Component Segment, 1-1/2" MNPT
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Wrench set recommended for tightening
$355.94
-
58 mm Closure, 1-1/2" FNPT Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Closures are molded PFA
- Closures are interchangeable and can be used with column components or segments
- Wrench set recommended for tightening
$38.22
-
58 mm Transfer Closure, (1) 1/4" OD Tube Port, 1-1/2" FNPT Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Closures are molded PFA
- Port contains tubing stop
- Closures are interchangeable and can be used with column components or segments
- Wrench set recommended for tightening
$66.19
-
58 mm Transfer Closure, (1) 1/4" FNPT Port, 1-1/2" FNPT Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Closures are molded PFA
- Closures are interchangeable and can be used with column components or segments
- Wrench set recommended for tightening
$68.78
-
58 mm Transfer Closure, (1) 3/8" OD Tube Port, 1-1/2" FNPT Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Closures are molded PFA
- Port contains tubing stop
- Closures are interchangeable and can be used with column components or segments
- Wrench set recommended for tightening
$81.68
-
58 mm Transfer Closure, (2) 1/8" OD Tube Ports, 1-1/2" FNPT Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Closures are molded PFA
- One port with tubing stop and one port for tube pass-thru
- Closures are interchangeable and can be used with column components or segments
- Wrench set recommended for tightening
$92.70
-
58 mm Transfer Closure, (2) 1/4" OD Tube Ports, 1-1/2" FNPT Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Closures are molded PFA
- One port with tubing stop and one port for tube pass-thru
- Closures are interchangeable and can be used with column components or segments
- Wrench set recommended for tightening
$105.68
-
58 mm Transfer Closure, (2) 1/2" OD Tube Ports, 1-1/2" FNPT Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Closures are molded PFA
- One port with tubing stop and one port for tube pass-thru
- Closures are interchangeable and can be used with column components or segments
- Wrench set recommended for tightening
$153.36
-
58 mm Transfer Closure, Pressure Relief Valve, Ultem® Clamp, 1-1/2" FNPT Threads
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Ultem™ clamp pressure relief valve for highest pressure applications
- Wrench set recommended for tightening
$288.03
-
Column Component Female Connector
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Designed to join columns and segments together
- Wrench set recommended for tightening
$56.45
-
Column Component Screen
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single molded construction
- Designed to fit within column components
- Use to support material within column or as course filtration
- Screen openings are approx 1mm
$20.94
-
Column Component Pressure Fixture
- Pressure fixtures are constructed of stainless steel
- Designed for added support and safety under high pressure applications
- Rated to 100 psi
$417.70
- Total: 29