Sample Prep
Sample prep solutions
-
33 mm Lug Style Torque Adapter
- Manufactured of HDPE
- Designed for use with 33 mm closures with lugs
- ¼” square female drive, includes ¼” square male to ¼” hex male adapter
- Used for application of uniform and consistent force when tightening closure
$288.39
-
14.7 mm PTFE Frit, 30 Micron
- Friction fit into Microcolumn or other capillary
- Retains sorbent and allows filtration
- Hydrophobic material best for solvent extractions
- Aqueous solutions can be filtered under pressure
Material: PTFE$43.44
-
PTFE Frit Material, One Square Inch, 15-20 Micron, 2.0 mm Thickness
- 2.0 mm thickness +/-0.25 mm
- Friction fit into Microcolumn or other capillary
- Retains sorbent and allows filtration
- Hydrophobic material best for solvent extractions
- Aqueous solutions can be filtered under pressure
Material: PTFE$51.16
-
PFA Marking Pen, Black, Box of 10
- Box of 10 pens
- Black ink color
- Adheres to PFA without beading or smudging
- Dries in 3-6 seconds
- Color-intensive, low odor
- Extremely lightfast
- Line width: Approx. 0.6 mm
- Easily removed with acetone or IPA
- Staedtler quality and performance
- Not resistant to boiling water and not recommended for marking products used in water baths
Material: PFA$81.28
-
PFA Marking Pen, Red, Box of 10
- Box of 10 pens
- Red ink color
- Adheres to PFA without beading or smudging
- Dries in 3-6 seconds
- Color-intensive, low odor
- Extremely lightfast
- Line width: Approx. 0.6 mm
- Easily removed with acetone or IPA
- Staedtler quality and performance
- Not resistant to boiling water and not recommended for marking products used in water baths
Material: PFA$81.28
-
Column Component Female Connector
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Vessels and segments are interchangeable and can be assembled in multiple ways
- Designed to join columns and segments together
- Wrench set recommended for tightening
$56.45
-
Column Component Screen
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single molded construction
- Designed to fit within column components
- Use to support material within column or as course filtration
- Screen openings are approx 1mm
$20.94
-
Tray, Polypropylene, 10" x 20" x 1-5/8"
- Constructed of Polypropylene
- Measures 10" x 20" x 1-5/8"
- Use as a safety tray under the DST-1000
Material: PP$107.30
-
Column Component Pressure Fixture
- Pressure fixtures are constructed of stainless steel
- Designed for added support and safety under high pressure applications
- Rated to 100 psi
$417.70
-
2.3 mm Impinger Orifice for 1/2" Port
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Single molded construction
- Designed to reduce openings on 375 ml impingers
$94.33
-
Vial Tray, 21 mm Openings
- Molded of green polypropylene
- 10 openings designed to organize vials
- Tray will accommodate 3, 5, 6, and 7 mL Savillex vials
- Includes ID cards
Material: PP$16.38
-
Vial Tray, 29 mm Openings
- Molded of green polypropylene
- 10 openings designed to organize vials
- Tray will accommodate 15, 22, 30, and 60 mL Savillex vials
- Includes ID cards
Material: PP$16.91
