Clean Sample Prep
Clean Sample Prep
-
120 mL Digestion Vessel, Flat Interior, Flat Exterior, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Flat exterior for hot plate heating and digestion
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$92.49
-
120 mL Digestion Vessel, Conical Interior, Cored Exterior, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Conical interior to aide in sample removal
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$96.15
-
120 mL Digestion Vessel, (1) 1/4" FNPT Side Port, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Side ports for fluid or gas transfer
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$157.54
-
120 mL Digestion Vessel, (2) 1/8" Side Ports, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Side ports for fluid or gas transfer
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$160.50
-
120 mL Digestion Vessel, (2) 1/4" Side Ports, Buttress Threaded Top
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Side ports for fluid or gas transfer
- Wrench set recommended for tightening
- IMPORTANT! Savillex digestion vessels are not designed to be used in microwave digestions systems. Savillex does not support their use in such systems due to the safety risk arising from the rapid increases in pressure and temperature that can occur.
$164.55
-
DST-1000 Acid Purification System, 100 V
- All wetted parts are molded PFA
- No cooling water required
- Complete with heating source, separate control unit, GL45 1/4" transfer closure, and all necessary fittings
- CE certified and RoHS compliant
- Includes a bottle bracket and a Savillex 1000 mL PFA Bottle
- Depending on the usage rate of high purity acid in your lab, a DST-1000 can pay for itself in months or even weeks
- One year parts warranty
$8,891.06
-
DST-1000 Acid Purification System, 115 V
- All wetted parts are molded PFA
- No cooling water required
- Complete with heating source, separate control unit, GL45 1/4" transfer closure, and all necessary fittings
- CE certified and RoHS compliant
- Includes a bottle bracket and a Savillex 1000 mL PFA Bottle
- Depending on the usage rate of high purity acid in your lab, a DST-1000 can pay for itself in months or even weeks
- One year parts warranty
$8,788.48
-
DST-1000 Acid Purification System, 230 V
- All wetted parts are molded PFA
- No cooling water required
- Complete with heating source, separate control unit, GL45 1/4" transfer closure, and all necessary fittings
- CE certified and RoHS compliant
- Includes a bottle bracket and a Savillex 1000 mL PFA Bottle
- Depending on the usage rate of high purity acid in your lab, a DST-1000 can pay for itself in months or even weeks
- One year parts warranty
$8,788.48
-
DST-1000 Acid Purification System, 230 V, UK 3-Pin Fused Plug
- All wetted parts are molded PFA
- No cooling water required
- Complete with heating source, separate control unit, GL45 1/4" transfer closure, and all necessary fittings
- Configured with UK BS-1363 3-pin fused plug
- CE certified and RoHS compliant
- Includes a bottle bracket and a Savillex 1000 mL PFA Bottle
- Depending on the usage rate of high purity acid in your lab, a DST-1000 can pay for itself in months or even weeks
- One year parts warranty
$8,788.48
-
DST-4000 Acid Purification System, 120 V
- All wetted parts are molded PFA
- No cooling water required
- Graduated front fill tube shows acid level remaining
- Separate, digital temperature controller with auto shut-off feature
- Includes (2) 2000 mL Lab Bottles (150-01-2000)
- CE certified and RoHS compliant
- One year parts warranty
$14,164.67
-
DST-4000 Acid Purification System, 230 V
- All wetted parts are molded PFA
- No cooling water required
- Graduated front fill tube shows acid level remaining
- Separate, digital temperature controller with auto shut-off feature
- Includes (2) 2000 mL Lab Bottles (150-01-2000)
- CE certified and RoHS compliant
- One year parts warranty
$14,164.67
-
DST-4000 Acid Purification System, 230UK
- All wetted parts are molded PFA
- No cooling water required
- Graduated front fill tube shows acid level remaining
- Separate, digital temperature controller with auto shut-off feature
- Includes (2) 2000 mL Lab Bottles (150-01-2000)
- CE certified and RoHS compliant
- One year parts warranty
$14,164.67
-
Vial Cleaning System
- For cleaning PFA vials and labware by heated soaking
- Maximum surface temperature of hotplate for vial cleaning system is 450°F (230°C)
- System components: cleaning container, cleaning container lid, sealing ring, vent nut assembly, pour spout assembly, ½” cap nut and silicone grip mat
- Included silicone grip mat holds container in place when sealing ring is tightened or removed
$1,268.03
-
7 mL Vial Rack System
- Holds (72) 7 mL vials and closures
- PFA racks with PTFE post and handle
- Drip tray included
- Designed for use with the Savillex vial cleaning system
- May be used with some 4 L glass beakers (requires PFA beaker lid)
$1,062.80
-
HPX-100 Hotplate, 100 VAC
- Teflon™ PFA coated graphite: heated working surface area is 292 mm x 212 mm (11.5 in x 8.4 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 200°C (+/- 2°C at 150°C)
- 100 VAC
- Plug style NEMA 5-15P
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,540.05
-
HPX-100 Hotplate, 120 VAC
- Teflon™ PFA coated graphite: heated working surface area is 292 mm x 212 mm (11.5 in x 8.4 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 240°C (+/- 2°C at 150°C)
- 120 VAC
- Plug style NEMA 5-15P
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,540.05
-
HPX-100 Hotplate, 230 VAC
- Teflon™ PFA coated graphite: heated working surface area is 292 mm x 212 mm (11.5 in x 8.4 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 240°C (+/- 2°C at 150°C)
- 230 VAC
- Plug style CEE 7/7
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,518.98
-
HPX-100 Hotplate, 230 VAC, UK 3-Pin Fused Plug
- Teflon™ PFA coated graphite: heated working surface area is 292 mm x 212 mm (11.5 in x 8.4 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 240°C (+/- 2°C at 150°C)
- 230 VAC
- Plug style UK BS 1363A (3-pin fused plug)
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,525.61
-
15 mL Vial Rack System
- Holds (36) 15 mL vials and closures
- PFA racks with PTFE post and handle
- Drip tray included
- Designed for use with the Savillex vial cleaning system
- May be used with some 4 L glass beakers (requires PFA beaker lid)
$973.50
-
HPX-200 Hotplate, 120 VAC
- Teflon™ PFA coated graphite: heated working surface area is 415 mm x 292 mm (16.4 in x 11.5 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 200°C (+/- 2°C at 150°C)
- 120 VAC
- Plug style NEMA 5-15P
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,848.43
-
HPX-200 Hotplate, 230 VAC
- Teflon™ PFA coated graphite: heated working surface area is 415 mm x 292 mm (16.4 in x 11.5 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 240°C (+/- 2°C at 150°C)
- 230 VAC
- Plug style CEE 7/7
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,848.43
-
HPX-200 Hotplate, 230 VAC, North America
- Teflon™ PFA coated graphite: heated working surface area is 415 mm x 292 mm (16.4 in x 11.5 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 240°C (+/- 2°C at 150°C)
- 230 VAC
- Plug style NEMA 6-15P
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,848.43
-
HPX-200 Hotplate, 230 VAC, UK 3-Pin Fused Plug
- Teflon™ PFA coated graphite: heated working surface is 415 mm x 292 mm (16.4 in x 11.5 in)
- Digital temperature controller with programmable timer included
- Includes PTFE protective side guards and underside heat protection
- Maximum temperature 240°C (+/- 2°C at 150°C)
- 230 VAC
- Plug style UK BS 1363A (3-pin fused plug)
- Teflon™ PFA coated graphite heating blocks for Savillex vials sold separately
- Two years parts warranty
$7,848.43
-
17 Position Heating Block
- Teflon™ PFA coated ISO-molded graphite
- Accepts 5 mL and 7 mL Savillex PFA vials
- Hole diameter: 23 mm (0.9 in)
- HPX-100 holds 3 blocks and HPX-200 holds 6 blocks
- L = 207 mm (8.1 in) x W = 99 mm (3.9 in) x H = 15 mm (0.6 in)
$505.89
-
30 mL Vial Rack System
- Holds (18) 30 mL vials and closures
- PFA racks with PTFE post and handle
- Drip tray included
- Designed for use with the Savillex vial cleaning system
- May be used with some 4 L glass beakers (requires PFA beaker lid)
$821.25
-
8 Position Heating Block
- Teflon™ PFA coated ISO-molded graphite
- Accepts 15 mL, 22 mL, 30 mL, and 60 mL Savillex PFA vials
- Hole diameter: 31 mm (1.2 in)
- HPX-100 holds 3 blocks and HPX-200 holds 6 blocks
- L = 207 mm (8.1 in) x W = 99 mm (3.9 in) x H = 19 mm (0.8 in)
$506.63
-
- PTFE/PFA two-piece construction
- Required when a partial vial rack system is used
- Tab in the center aligns with slot in the post to securely lock racks in place
- Does not replace the handle – a handle is still required
- To make rack system configuration easier, download the rack configurator which automatically calculates the height of the selected rack combination and indicates if a retainer is needed or not
Retainer, Vial Rack System
- PTFE/PFA two-piece construction
- Required when a partial vial rack system is used
- Tab in the center aligns with slot in the post to securely lock racks in place
- Does not replace the handle – a handle is still required
- To make rack system configuration easier, download the rack configurator which automatically calculates the height of the selected rack combination and indicates if a retainer is needed or not
$185.58
-
- PTFE
- Racks are loaded onto the post to build the vial rack system
- Threaded top accepts the handle
- Slotted to accommodate retainer when a partial vial rack system is used
- Includes attached PFA base
- To make rack system configuration easier, download the rack configurator which automatically calculates the height of the selected rack combination and indicates if a retainer is needed or not
Post, Vial Rack System
- PTFE
- Racks are loaded onto the post to build the vial rack system
- Threaded top accepts the handle
- Slotted to accommodate retainer when a partial vial rack system is used
- Includes attached PFA base
- To make rack system configuration easier, download the rack configurator which automatically calculates the height of the selected rack combination and indicates if a retainer is needed or not
$176.68
-
1/4" Vent Nut Assembly
- Vent Nut Assembly Components: ¼” vent nut, 9 mm PTFE filter membrane, PTFE retaining ring
- Used to vent the vial cleaning system during heating
- The adjustable vent nut assembly also enables smooth controlled liquid flow through the pour spout
- Recommended annual replacement for vial cleaning system
$23.09
-
Cleaning Container Lid
- Fits cleaning container
- ½” tube port and ¼” tube port
- Fittings not included
- ½” tube port only accepts P/N 550-740-400835 or P/N 550-740-600586
- Requires sealing ring (P/N 550-740-400823)
- Can be modified to add additional ports (contact Savillex for details)
$187.46
-
Sealing Ring
- Upper service temperature of ECTFE is 300°F (150°C)
- Fits cleaning container
- Silicone grip mat (P/N 730-0060) is recommended for tightening and loosening the sealing ring
$294.53
-
1/2" Ferrule Nut, Cleaning System
- Provides for leak free connection of pour spout to cleaning container lid
- Compatible ONLY with Savillex PFA cleaning system products
$21.54
-
Pour Spout Assembly
- Pour spout assembly components: 1/2” ferrule nut, 3/8” cap nut, pour spout tube
- Connects to the cleaning container lid to provide a safe efficient way to empty the cleaning container
- Compatible ONLY with cleaning container lid (P/N 550-740-400817)
$49.57
-
4000 mL Cleaning Container
- Large 4 L capacity
- Flat bottom surface for even heating on a hotplate
- Requires cleaning container lid and sealing ring
$1,140.97
-
- Holds (12) 30 mL vials
- Molded PFA
- Laser marked with vial size
- Integrated spacer prevents contact of vial rim with underside of rack above
- Open grid design maximizes acid contact
- To make rack system configuration easier, download the rack configurator which automatically calculates the height of the selected rack combination and indicates if a retainer is needed or not
30 mL Vial Rack
- Holds (12) 30 mL vials
- Molded PFA
- Laser marked with vial size
- Integrated spacer prevents contact of vial rim with underside of rack above
- Open grid design maximizes acid contact
- To make rack system configuration easier, download the rack configurator which automatically calculates the height of the selected rack combination and indicates if a retainer is needed or not
$107.00
-
- Holds (12) 15 mL vials
- Molded PFA
- Laser marked with vial size
- Integrated spacer prevents contact of vial rim with underside of rack above
- Open grid design maximizes acid contact
- To make rack system configuration easier, download the rack configurator which automatically calculates the height of the selected rack combination and indicates if a retainer is needed or not
15 mL Vial Rack
- Holds (12) 15 mL vials
- Molded PFA
- Laser marked with vial size
- Integrated spacer prevents contact of vial rim with underside of rack above
- Open grid design maximizes acid contact
- To make rack system configuration easier, download the rack configurator which automatically calculates the height of the selected rack combination and indicates if a retainer is needed or not
$109.01
