Industries
Specialty products for specialized industry
Industries
-
500 µL PFA Vial, Straight Interior, Crimp Top Opening
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Standard 12x32 autosampler vial
- Vial accommodates standard 11 mm crimp top closure
Material: PFAVolume: 0.5 mL$14.81
-
500 µL Microcentrifuge Vial, 8 mm Snap-on Opening
- Conical interior base
- Will fit most standard microcentrifuge models
- 8 mm Snap-on Opening
- RCF up to 10,000 g
- Alternative to Cetac ASX110/112 part number SP5477 (0.5 mL PFA vial)
- Fits other autosamplers used in ICP-MS and GFAAS
- Can be used as a tip cover for PFA wash bottle part #700-500
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
Material: PFA$10.63
-
1.3 mL PFA Vial, Conical Interior
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- 13 mm opening
- Designed specifically for GFAA autosamplers on PE and Varian instruments
Material: PFAVolume: 1.3 mL$16.68
-
1.5 mL PFA Vial, Conical Interior
- Comparable to Agilent ICP-MS part number G3160-65317 (1.5 mL PFA vial for I-AS tray type D)
- Same product as Cetac ASX110/112 part number SP5472 (1.5 mL PFA vial)
- Fits other autosamplers used in ICP-MS and GFAAS
- Slightly conical interior base
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
Material: PFAVolume: 1.5 mL$13.57
-
1.5 mL Microcentrifuge Vial, 11 mm Snap-on Opening
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Will fit most standard microcentrifuge models
- RCF up to 10,000 g
- 11 mm Snap-on Opening
Material: PFA$11.18
-
60 mL Impinger, (2) 1/8" OD Tube Ports, PFA Insert and Ultem® Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- Vertical port allows close assembly of sampling train
- Ultem® clamp for extra security
- Ultem® clamp does not contact sample mater
- Comes with closure listed in product description
- One port with tubing stop and one port for tube pass-thru
Material: PFA, PEIVolume: 60 mL$170.69
-
60 mL Impinger, (2) 1/4" OD Tube Parts, PFA Insert and Ultem® Clamp
- Service Temperature Range to 275&F
- Vertical port allows close assembly of sampling train
- One port with tubing stop and one port for tube pass-thru
- Ultem® clamp for extra security
- Ultem® clamp does not contact sample material
- For use with EPA and other air sampling protocols
- Comes with closure listed in product description
Material: PFA, PEIVolume: 60 mL$160.01
-
50 mL PFA Block Digestion Tube with Closure
- Designed for block digestion units
- Thin walled for maximum heat transfer and good visibility of contents
- 50 mL graduation mark to Class A specifications
- Includes a threaded polypropylene closure
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
Material: PFAVolume: 50 mL$78.13
-
3 mL Purillex PFA Vial
3 mL Vial Designed for Life Sciences Applications
- Ideal for stability testing, final drug product sample storage, vaccine seed stock preparation, viral vector storage, and storage of LNP formulations
- Produced using the same resin manufacturer and grade as our Purillex® Life Sciences bottles
- Includes PFA closure
- Includes full lot certification
- Available sterilized (autoclaved) upon request
Material: PFA$23.66
-
7 mL Purillex PFA Vial
7 mL Vial Designed for Life Sciences Applications
- Ideal for stability testing, final drug product sample storage, vaccine seed stock preparation, viral vector storage, and storage of LNP formulations
- Produced using the same resin manufacturer and grade as our Purillex® Life Sciences bottles
- Includes PFA closure
- Includes full lot certification
- Available sterilized (autoclaved) upon request
Material: PFA$27.84
-
7 mL Purillex PFA Vials, Rack Refill, 50 Vials/Case
- Ideal for stability testing, final drug product sample storage, vaccine seed stock preparation, viral vector storage, and storage of LNP formulations
- Produced using the same resin manufacturer and grade as our Purillex® Life Sciences bottles
- Includes PFA closure
- Includes full lot certification
- 50 vials with closure in a single bag
Material: PFA$1,252.63
-
15 mL Purillex PFA Vial
15 mL Vial Designed for Life Sciences Applications
- Ideal for stability testing, final drug product sample storage, vaccine seed stock preparation, viral vector storage, and storage of LNP formulations
- Produced using the same resin manufacturer and grade as our Purillex® Life Sciences bottles
- Includes PFA closure
- Includes full lot certification
- Available sterilized (autoclaved) upon request
Material: PFA$45.93
-
15 mL Purillex PFA Vials, Rack Refill, 50 Vials/Case
- Ideal for stability testing, final drug product sample storage, vaccine seed stock preparation, viral vector storage, and storage of LNP formulations
- Produced using the same resin manufacturer and grade as our Purillex® Life Sciences bottles
- Includes PFA closure
- Includes full lot certification
- 50 vials with closure in a single bag
Material: PFA$2,067.01
-
7 mL Purillex PFA Vials, Racked, 10 Racks/Case
- Ideal for stability testing, final drug product sample storage, vaccine seed stock preparation, viral vector storage, and storage of LNP formulations
- Produced using the same resin manufacturer and grade as our Purillex® Life Sciences bottles
- Includes full lot certification
- 10 Vials/Rack, 10 Racks/Case, 100 Vials/Case
Material: PFA$2,941.66
-
15 mL Purillex PFA Vials, Racked, 10 Racks/Case
- Ideal for stability testing, final drug product sample storage, vaccine seed stock preparation, viral vector storage, and storage of LNP formulations
- Produced using the same resin manufacturer and grade as our Purillex® Life Sciences bottles
- Includes full lot certification
- 10 Vials/Rack, 10 Racks/Case, 100 Vials/Case
Material: PFA$4,759.08
-
25 mm Single Stage Filter Assembly, 1/8" x 1/8"
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- Hand tighten, no wrench required
- Ferrule nut connections for 1/8” tubing on inlet and outlet
$230.90
-
25 mm Single Stage Filter Assembly, 1/4" x 1/4"
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- Hand tighten, no wrench required
- Ferrule nut connections for ¼” tubing on inlet and outlet
$155.80
-
47 mm Single Stage Filter Assembly, 1/4" x 1/4", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
Material: PFA$186.86
-
47 mm Single Stage Filter Assembly, 1/4" x 1/4", Tefzel® Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- TefzelTM clamp nut for higher pessure applications
- TefzelTM service temperature range (300°C/148°C)
- Recommend wrench set for assembly
$185.82
-
50 mm Single Stage Filter Assembly, 1/4" x 1/4", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
- Suitable as particulate filter for EPA method 16A
Material: PFA$223.01
-
50 mm Single Stage Filter Assembly, 1/4" x 1/4", Tefzel® Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- TefzelÒ clamp nut for higher pressure applications
- TefzelÒ service temperature range (300/148)
- Recommend wrench set for assembly
$214.66
-
47 mm Single Stage Filter Assembly, 1/4" MNPT x 1/4" MNPT, PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- TefzelÒ clamp nut for higher pressure applications
- TefzelÒ service temperature range (300/148)
- Recommend wrench set for assembly
Material: PFA$186.99
-
50 mm Single Stage Filter Assembly, 1/2" x 1" x 1/2" x 1", PFA clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
Material: PFA$222.96
-
50 mm Single Stage Filter Assembly, 1/2" x 1" x 1/2" x 1", Tefzel®
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- Tefzel clamp nut for higher pressure applications
- Tefzel service temperature range (300/148)
- Recommend wrench set for assembly
$229.18
-
13 mm Single Stage Filter Assembly, Female Leur-Lock Inlet
- Service temperature range is 275°F/135°
- Two-piece design allows changing membranes without disconnecting lines
- Female luer lock inlet for syringe attachment
- Male luer slip outlet
- Compatible with Savillex PFA Syringe (P/N 700-510)
- Bi-directional membrane support accepts 13 mm filter membranes
$112.88
-
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Used for Dissolved and Particulate Carbon Analysis
- Features 1/4” inlet and outlet ports. Two 1/4in PFA ferrule nuts are included, to accept 1/4” OD tubing
- Wrench set for assembly is included
- Fluorocarbon Pressure Filtration Unit - DOC 47 Configuration
- 150 mL reservoir for sample
- Reference U.S.G.S National Field Manual for the Collection of Water-Quality Data
- Filters must be purchased separately
Filter Holder Assembly - U.S. Geological Survey - DOC 47 Configuration
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Used for Dissolved and Particulate Carbon Analysis
- Features 1/4” inlet and outlet ports. Two 1/4in PFA ferrule nuts are included, to accept 1/4” OD tubing
- Wrench set for assembly is included
- Fluorocarbon Pressure Filtration Unit - DOC 47 Configuration
- 150 mL reservoir for sample
- Reference U.S.G.S National Field Manual for the Collection of Water-Quality Data
- Filters must be purchased separately
$431.56
-
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- PFA body with stainless steel support grid
- Used for Dissolved Organic Carbon Analysis
- Fluorocarbon Pressure Filtration Unit - DOC 25 configuration
- Reference USGS National Field Manual Procedures for Processing Samples for Analysis of Dissolved Organic Carbon and Inorganic and Organic Particulate Carbon
- Filters must be purchased separately
Filter Holder Assembly - U.S.Geological Survey - DOC 25 Configuration
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- PFA body with stainless steel support grid
- Used for Dissolved Organic Carbon Analysis
- Fluorocarbon Pressure Filtration Unit - DOC 25 configuration
- Reference USGS National Field Manual Procedures for Processing Samples for Analysis of Dissolved Organic Carbon and Inorganic and Organic Particulate Carbon
- Filters must be purchased separately
$428.11
-
47 mm Two-Stage Filter Assembly, 1-1/2" x 1/4", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
Material: PFA$256.83
-
47 mm Two-Stage Filter Assembly, 1-1/2' x 3/8", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
Material: PFA$266.23
-
47 mm Two-Stage Filter Assembly, 1-1/2" x 1/4" MNPT, PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
Material: PFA$263.52
-
47 mm Two-Stage Filter Assembly, 1/4" x 1/4", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
Material: PFA$238.86
-
47 mm Two-Stage Filter Assembly, 1/4" MNPT x 1/4" MNPT, PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
Material: PFA$245.81
-
47 mm Three-Stage Filter Assembly, 1-1/2" x 1/4", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
Material: PFA$297.10
-
47 mm Three-Stage Filter Assembly, 1-1/2" x 3/8", PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
Material: PFA$304.88
-
47 mm Three-Stage Filter Assembly, 1-1/2" x 1/4" MNPT, PFA Clamp
- Service temperature range of PFA is ‑328°F to 500°F (‑200°C to 260°C)
- All wetted components are molded PFA
- Filter membranes can be replaced without disconnecting lines
- PFA clamp nut for higher temperature applications
- Recommend wrench set for assembly
Material: PFA$302.04
